Diesel Dispenser

• Supply kit composed of two hydraulic pumps with piston meters.
• It is designed for mixing diesel with oil to get mixed biodiesel.
• It has an inlet of two independent liquids and supply of the mixed fluid.
• Interior switch to supply 100% diesel or 100% oil.
• The mixing selection to be supplied is made through a pulser and a display that there is in its interior.
• You could supply any percentage among 5 and 95%.

• The mixing selection is automatically made when the vehicle is identified.
• When the vehicle is typed, you will assign a percentage of mixing to be made.
• Each vehicle can have assigned a different mixing percentage.
• When the user identifies the vehicle in the kit, this will automatically supply the assigned mixing percentage.
• Optional: thermal printer

Composed of:

CHASSIS

• Made of steel
• Special interior and exterior treatment against corrosion
• Finish with epoxid brilliant paint
• Weatherproof

HYDRAULIC GROUP composed of:

• Pump: Self-suction, eccentric with self-adjusting blades with gas separator · Flow: 70-90 l/min · Recirculation bypass valve · Anti-return valve · Filter
• Meter: Made of aluminium of 4 pistons with positive moving · Accuracy: 0.2 % · Pulser of 2 channels of 100 pulses per litre and mechanical totalizer
• Motor: 2 motors of 1 kW 230/400 VAC · EExd with ATEX certificate, 3 ph, with IP-55 protection
  • * Optionally it could be supplied with single-phase motors of 0.90 kW 230 VAC · EExd with ATEX certificate, with IP-55 protection

• Mixing system

CONTROLLER

• GK-7 own consumption

It is supplied with:

• 4 m delivery diesel hose Ø25 mm double layer with adapters on both ends
• PA-80 automatic nozzle with rotary swivel

• Size: 800x400x1,500 mm (length x width x height)
• Weight: 150.5 kg

• Supply kit composed of two hydraulic pumps with piston meters.
• It is designed for mixing diesel with oil to get mixed biodiesel.
• It has an inlet of two independent liquids and supply of the mixed fluid.
• Interior switch to supply 100% diesel or 100% oil.
• The mixing selection to be supplied is made through a pulser and a display that there is in its interior.
• You could supply any percentage among 5 and 95%.

• The mixing selection is automatically made when the vehicle is identified.
• When the vehicle is typed, you will assign a percentage of mixing to be made.
• Each vehicle can have assigned a different mixing percentage.
• When the user identifies the vehicle in the kit, this will automatically supply the assigned mixing percentage.
• Optional: thermal printer

Composed of:

CHASSIS

• Made of steel
• Special interior and exterior treatment against corrosion
• Finish with epoxid brilliant paint
• Weatherproof

HYDRAULIC GROUP composed of:

• Pump: Self-suction, eccentric with self-adjusting blades with gas separator · Flow: 70-90 l/min · Recirculation bypass valve · Anti-return valve · Filter
• Meter: Made of aluminium of 4 pistons with positive moving · Accuracy: 0.2 % · Pulser of 2 channels of 100 pulses per litre and mechanical totalizer
• Motor: 2 motors of 1 kW 230/400 VAC · EExd with ATEX certificate, 3 ph, with IP-55 protection
  • * Optionally it could be supplied with single-phase motors of 0.90 kW 230 VAC · EExd with ATEX certificate, with IP-55 protection

• Mixing system

CONTROLLER

• GK-7 own consumption

It is supplied with:

• 4 m delivery diesel hose Ø25 mm double layer with adapters on both ends
• PA-80 automatic nozzle with rotary swivel

• Size: 800x400x1,500 mm (length x width x height)
• Weight: 150.5 kg

• Self-suction - self-priming. Eccentric of self-adjusting blades
• With recirculation bypass
• Suction: 2.7 m · Delivery: 30 m
• Priming pipe suction: 5 m
• Free flow: 50 l/min
• Consumption: 1.2-2 A
• Motor: 0.25 kW 230 VAC self-ventilated 50/60 Hz single-phase with thermal protector
• S1 Continuous duty
• IP-55 Protection
• 3,000 rpm
• Connection through F1" (BSP) threads and flanges
• It has built in a cleaning steel filter of 350 µm (micron).
• ON/OFF luminous switch with IP-55 protection
• 3 m electric cable with homologated plug
• Anti-rust treatment

• Dim.: 146x225x185 mm (length x width x height)
• Weight: 8.50 kg

Mechanical compact supply kit suitable for the diesel transfer to own consumption vehicles.

Composed of:

CHASSIS:

• made of steel
• interior and exterior treatment to protect against corrosion
• high epoxid brilliant paint
• weatherproof

PUMP:

• IRON-50 12 VDC self-suction with self-adjusting blades · *Ask for 24 V model

METER:

• MG-80 mechanical meter

NOZZLE:

• PA-60 automatic

HOSE:

• 4 m Ø19 mm delivery diesel hose double layer, with adapters in both ends

• Dim.: 380x345x360 mm (length x width x height)
• Weight: 18 kg

USE

• The SHEM TECNO commercial dispensers with GESPASA electronic calculator and electric explosionproof installation are suitable for the diesel or petrol supply and sale.
• It is suitable for service stations, cooperatives, transport companies and so on.

FEATURES

• The electronics is composed of 3 displays that show
  • Price per litre
  • Total amount
  • Supplied litres
• The electronics allows to preset the product quantity to be supplied.
• The pumping unit has a degasifier with float chamber that eliminates the air and vapour of the fuel.

Composed of

CHASSIS

• Made of steel with a special interior and exterior treatment against the corrosion
• Finish with brilliant epoxid paint. Weather-resistant.

HYDRAULIC GROUP

Composed of

2 Pumps

• Flow 50 l/min · 80 l/min (according to the model)
• Aluminium pump body
• Self-suction, eccentric of self-adjusting blades with gas separator
• Recirculation bypass valve
• Check valve
• Interior filter
• Self-tightened belt system

2 Meters

• of aluminium of 4 pistons with positive movement
• Accuracy 0,2 % (flow from 4 to 80 l/min)
• Pulser of 2 channels of 100 pulses per litre and mechanical totalizer

2 Motors

• 1 kW 230/400 VAC · triphasic EExd explosionproof;
• 1 kW 230 VCA 50 Hz · single-phase EExd explosionproof (ATEX)

1 or 2 ELECTRONIC CALCULATOR (according to the model)

• Electronic LCD with 6-digit display for volume and amount and 4-digit display for price

It is supplied with

• 4 m delivery hose Ø19 mm double layer with adapters in both ends · EN1360
• PA-80 · Automatic diesel nozzle with MF1" swivel
• BSP 3/4" · reconnection "breakaway" valve

• The fuel dispenser is designed and manufactured for the fuel supply and it is equipped with a supply point. This kit has built-in an accuracy measuring system and a special electronics that shows the supplied litres and the supply amount.
• The fuel dispenser is available in four different versions of chassis: Estilo, Tecno, SPUTNIK and Blue. The chassis can be made in stainless steel, carbon steel or fibreglass, according to each piece and version.
• The fuel dispenser has one or many hydraulic groups with model approval, composed of a pump with degasifier and one or two piston meters for each hydraulic group that guarantees an accuracy in the measuring of ±0,2 %. Each meter has an encoder that transmits pulses to the electronics.
• The fuel dispenser also has one or some supply points into the same compact unit, which allows a best profit of the fuel dispenser interior space. Each one of the supply points is composed of a hose with a tensor that allows maintaining the hose picked up at any moment.
• It has one or two electronics. These are GESPASA mark, EM-1 model, and they have an hydraulic and electronic technology more adequate to get the required trustworthiness by our customers.
• It is suitable for service stations, cooperatives, transport companies, ...
• The electronics is composed of 3 displays that show:
  • Price per litre
  • Total amount
  • Supplied litres

Avant-garde electronics

• Luminous display of high size that makes easier the quantity vision;
• Minimum supplied amount presence of 15 minutes if the lights have gone out;
• Possibility of litre or amount preset;
• Three preset keys: x1, x10, RESET;
• Mechanical and Electronic totalizer;
• Communication protocol with controller/computer;
• Possibility of changing the fuel price form the own dispenser or a controller;
• High trustworthiness;
• The electronics can control up to 4 hoses;
• The electronics is installed into a watertight head.

Trustworthy and guaranteed accuracy meter

• Piston meter with electronic pulser with error control;
• Accuracy: 0,2 % (5-80 l/min);
• Adjustment through a sealed wheel;
• Pulser of 2 channels with a resolutions of 100 l/min;
• Mechanical totalizer.

Hydraulic pump with gas separator

• Self-suction blade pump with air separator and a filter in the suction;
• Standard flow: 50-80 l/min
• Steel mesh of easy access and (clean and reused);
• Motor: 1 kW S1 230/400 VAC 50/60 Hz three-phase EExd with ATEX certificate and IP-55 protection;
• Driving belt with automatic tensor.

Structure

• Main structure made of stainless lacquered-matt steel;
• Protective structure of the pumping kit and the electronics made of newest PRFV material.

Size: 1010x600x1900 mm (length x width x height)

• Supply kit composed of two hydraulic pumps with piston meters.
• It is designed for mixing diesel with oil to get mixed biodiesel.
• It has an inlet of two independent liquids and supply of the mixed fluid.
• Interior switch to supply 100% diesel or 100% oil.
• The mixing selection to be supplied is made through a pulser and a display that there is in its interior.
• You could supply any percentatge among 5 and 95 %.

Composed of:

CHASSIS

• Made of steel
• Special interior and exterior treatment against corrosion
• Finish with epoxid brilliant paint
• Weatherproof

HYDRAULIC GROUP composed of:

• Pump: Self-suction, eccentric with self-adjusting blades with gas separator · Flow: 70-90 l/min · Recirculation bypass valve · Anti-return valve · Filter
• Meter: Made of aluminium of 4 pistons with positive moving · Accuracy: 0.2 % · Pulser of 2 channels of 100 pulses per litre and mechanical totalizer
• Motor: 2 motors of 1 kW 230/400 VAC · EExd with ATEX certificate, 3ph, with IP-55 protection
  • * Optionally it could be supplied with single-phase motors of 0.90 kW 230 VAC · EExd with ATEX certificate, with IP-55 protection

• Mixing system

EL-1 ELECTRONIC DISPLAY

• Automatic start and stop
• Liquid crystal luminous Display of high visibility
• Partial Indicator of 3 digits and 2 decimals or 4 digits and 1 decimal
• Electronic totalizer of 5 digits
• Visualization of the supply during 15 minutes if there is a supply system absence

It is supplied with:

• 4 m delivery diesel hose Ø25 mm double layer with adapters on both ends
• PA-80 automatic nozzle with rotary swivel

• Size: 800x400x1,500 mm (length x width x height)
• Weight: 150.5 kg

USE

• The SHEM TECNO commercial dispensers with GESPASA electronic calculator and electric explosionproof installation are suitable for the diesel or petrol supply and sale.
• It is suitable for service stations, cooperatives, transport companies and so on.

FEATURES

• The electronics is composed of 3 displays that show
  • Price per litre
  • Total amount
  • Supplied litres
• The electronics allows to preset the product quantity to be supplied.
• The pumping unit has a degasifier with float chamber that eliminates the air and vapour of the fuel.

Composed of

CHASSIS

• Made of steel with a special interior and exterior treatment against the corrosion
• Finish with brilliant epoxid paint. Weather-resistant.

HYDRAULIC GROUP

Composed of

Pump

• Flow 50 l/min · 80 l/min (according to the model)
• Aluminium pump body
• Self-suction, eccentric of self-adjusting blades with gas separator
• Recirculation bypass valve
• Check valve
• Interior filter
• Self-tightened belt system

Meter

• of aluminium of 4 pistons with positive movement
• Accuracy 0.2 % (flow from 4 to 80 l/min)
• Pulser of 2 channels of 100 pulses per litre and mechanical totalizer

Motor

• 1 kW 230/400 VAC · triphasic EExd explosionproof (ATEX);
• 1 kW 230 VCA 50 Hz · single-phase EExd explosionproof (ATEX)

ELECTRONIC CALCULATOR

• Electronic LCD with 6-digit display for volume and amount and 4-digit display for price
• Back-lit electronics

It is supplied with

• 4 m delivery hose Ø19 mm double layer with adapters in both ends · EN1360
• PA-80 · Automatic diesel nozzle with MF1" swivel
• BSP 3/4" · reconnection "breakaway" valve

FUNCTION

• Kit for measuring out and supplying additive
• It has an injection pump and an electronic heading that allows to configure the percentages of additive corresponding to each type of fuel.
• Optionally, it can send the supply data to a PC or the "cloud".
• The equipment allows to configure one or several products, depending on whether the equipment is to add additive to a fixed tank, where the product will always be the same, e.g.: diesel A; or it is to add additive when filling tank trucks, where different products can be loaded from the same equipment, for example: diesel A, diesel B, ...
• From the electronics it is possible to configure the percentage in ml/m³ you want to add. These data are saved in memory.
• The user must only indicate on the display the litres of fuel that are discharged or desired to add additive and the equipment will inject the corresponding amount of additive. In the case that it is configured to add different percentages according to the product, the user must also select the fuel that must be added on the display: diesel A, diesel B, ... In this case, the equipment will inject the percentage of additive that we have configured for the selected product and the quantity that we have indicated.
• The kit is supplied with suction pipe and a kit adaptable to drums. It is possible to make the suction kit according your requirements.
• The electronics allows the restricted use to authorised users, through iButton or PIN code.
• From a PC or the Internet, it is possible to check the supplies made with the additive, the supply day and hour, the worker, the supplied additive, the remainder additive stock, to input additive and so on.

TECHNICAL DATA

• Adjustable flow rate: between 5-45 l/h
• Pression: 2 bar
• Power: 30 W
• Pump protection: IP-65
• Voltage: among 100-230 VAC
• Dose settings per product: ml/m³

• Dim.: 470x310x540 mm (length x width x height)
• Weight: 25.5 kg